Moxa Technologies CSM-200-1213 Manual de usuario

CSM-200 Series Hardware Installation Guide First Edition, November 2009 © 2009 Moxa Inc. All rights reserved. Reproduction w

- 2 -Overview Introduction The CSM-200 series is an Ethernet to optical fiber media converter and is part of the NRack System. It provides Ethernet

- 3 -Features y LFP(Link Fault Pass-through) and FEF(Far End Fault) y Two different operation modes ¾ Store-and-Forward ¾ Pass Through y Auto n

- 4 -CSM-200-1214/CSM-200-1218 117.1 mm (4.61 in)124.3 mm (4.89 in)86.8 mm(3.42 in)21 mm(0.83 in)PWRFiberLinkTX10M100MRX ATTENTION Electrostatic Di

- 5 -RJ45 (8-pin) to RJ45 (8-pin) Straight-Through Cable Wiring Straight-Through CableRJ45 Plug Pin 1Switch PortRJ45ConnectorRJ45ConnectorTx+Tx-Rx+R

- 6 -ATTENTION This is a Class 1 Laser/LED product. Do not stare into the Laser Beam. Switch Settings There is 1 set of DIP switches on the board.

- 7 -Auto MDI/MDI-X Connection The Auto MDI/MDI-X function allows users to connect the Moxa CSM-200’s 10/100BaseTX ports to any kind of Ethernet dev

- 8 -Specifications Technology Standards IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), 100BaseFXInterface RJ45 ports 10/100BaseT(X) Fiber p

EMS EN61000-4-2 (ESD), Criteria A, Level 4 EN61000-4-3 (RS), Criteria A, Level 2 EN61000-4-4 (EFT), Criteria A, Level 3 EN61000-4-5 (Surge), Criteri