Moxa-technologies Moxa EtherDevice Switch EDS-508 Manual de usuario descargar pdf (Pagina 29)

EDS-508 Series User’s Manual Featured Functions

3-13

When configuring port trunking, note that:

# Each EDS can use a maximum of 4 Port trunking groups (designated Trk1, Trk2, Trk3,

Trk4)

# Each port trunking group uses between 1 and 4 ports

# All ports belonging to one port trunking group must be set to the same speed. E.g., 100 M

Full, 100M Half, 10M Full, or 10M Half. The auto-negotiation function should be disabled.

When you activate port trunking settings, some advanced functions will either be set to factory

default values, or disabled:

# Communication Redundancy will be set to the factory default

# 802.1Q VLAN will be set to the factory default and will be disabled

# Multicast Filtering will be set to the factory default

# Port Lock will be set to the factory default and will be disabled

# Set Device IP will be set to the factory default

# Mirror will be set to the factory default and will be disabled

Configuring Port Trunking

Port Trunking Settings

The following figures indicate which Port Trunking Setting parameters can be configured. A more

detailed explanation of each parameter is given below the figure.

Trunking settings

Setting Descriptions Factory Default

----

Do not select this port to join port

trunking groups

None

Trk1

Select this port to join port trunking

group 1

None

Trk2

Select this port to join port trunking

group 2

None

Trk3

Select this port to join port trunking

group 3

None

Trk4

Select this port to join port trunking

group 4

None

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 91 92

Sin comentarios

Moxa-technologies Moxa EtherDevice Switch EDS-508 Manual de usuario Pagina 29