
VPort CGI Commands VPort CGI Commands
speedlinkname24 extended PTZ control.
speedlinkcmd01 to
speedlinkcmd24
G/S Max. 60 char (CustCamString) User defined string pattern for
command instruction
customcmd01 to
customcmd10
G/S Max. 60 char (CustCamString) 01: “Up” command
02: “Down” command
03: “Left” command
04: “Right” command
05: “Zoom In” command
06: “Zoom Out” command
07: “Focus Near” command
08: “Focus Far” command
09: “Home” command
10: “Stop” command
*PTZ driver=2(Custom Camera)
VPort will use these commands
comport
Some VPorts have a DB9 COM port, which can act as the NPort’s COM port. This port can be used to control the
PTZ camera, or for pure Serial–to-Ethernet communications, just like a Moxa NPort series product. For
Real-COM driver details, please refer to VPort ActiveX SDK Plus, which includes the windows driver installation
utility. *This section only applies to models with a COM Port serial interface.
Item Action Value Description
method G/S 0: Serial Device Control
1: PTZ Camera Control
Select the software function for the
COM Port.
baudrate G/S 110, 300, 600, 1200, 2400, 3600,
4800, 7200, 9600, 19200, 38400,
57600, 115200
Baudrate (bps)
databit G/S 5 to 8 Data bits
paritybit G/S 0: None
1: Odd
2: Even
Parity bit
stopbit G/S 1, 1.5, 2 Stop bit
uartmode G/S 0: RS232
1: RS485
2: RS422
UART Interface mode
mode G/S 0: RealCom Mode
1: TCP Server Mode
2: TCP Client Mode
Serial to Ethernet Operation Mode
rlcomdelimiter1,
rlcomdelimiter2
G/S 0 to 255 Data Packing delimiter
rldelimiterenable1,
rldelimiterenable2
G/S 0: Disable
1: Enable
Data Packing delimiter Enable
rlforcetransmit G/S 0 to 65535 Force Transmit time (msec)
srvacttime G/S 0 to 65535 Inactivity time
srvdelimiter1,
srvdelimiter2
G/S 0 to 255 Data Packing delimiter
srvdelimiterenable1,
srvdelimiterenable2
G/S 0: Disable
1: Enable
Data Packing delimiter Enable
srvforcetransmit G/S 0 to 65535 Force Transmit time (msec)
srvlocaltcpport G/S 1 to 65535 Local TCP Port
cliacttime G/S 0 to 65535 Inactivity time
clidelimiter1, G/S 0 to 255 Data Packing delimiter
Comentarios a estos manuales