ww w. m oxa.c om ema i l: i n fo@mo xa.co m
6-10
6
Video Networking Products >
VPort 351 Series
Remote Monitoring Solutions
Video
Video Compression: MJPEG, MPEG4 (ISO/IEC 14496-2)
Video Input: 1, BNC connector
Video Output: 1, loop-through BNC connector
NTSC/PAL: Auto-sensing or manual
Video Resolution and FPS (frames per second):
Video Viewing:
Adjustable image size and qualityUÊ
Timestamp and text overlayUÊ
Audio
Audio Input: 1 Line-in or MIC-in, 3.5 mm phone jack
Audio Output: 1 Line-out, 3.5 mm phone jack
Network
Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP,
RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv3, DDNS
Ethernet: 1 10/100BaseT(X) auto negotiating RJ45 port, or 1 100BaseFX
fiber port (single/multi-mode SC connector)
Serial Port
PTZ Port: 1, RS-232/422/485 terminal block connector, max. 115.2 Kbps
Console Port: 1 RS-232 RJ45 port
GPIO
Digital inputs: 2, max. 8 mA
“High”: +13V to +30V
“Low”: -30V to +3V
Relay outputs: 2 (max. 24 VDC @ 1A)
LED Indicators
STAT: Indicates if the system boots properly or not
PWR1: Power 1
PWR2: Power 2
FAULT: Can be configured to correspond to system alarm, power failure,
video loss, or disconnected network
VIDEO: Video input signal active
AUDIO TEST: Audio input signal in test mode
PTZ: PTZ control signal active
Physical Characteristics
Housing: Metal, IP30 protection
Dimensions (W x H x D): 52.98 x 135 x 105 mm ( 2.09 x 5.31 x 4.13 in.)
Weight: 960 g
Installation: DIN-Rail mounting, wall mounting (optional kit)
Power Requirements
Input Voltage: 2 12/24 VDC or 24 VAC inputs for redundancy
Power Consumption: Max. 8W
Environmental Limits
Operating Temperature: 0 to 60°C (32 to 140°F)
-40 to 75°C (-40 to 167°F) for T models
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory Approvals
Safety: UL508
Hazardous Location:
UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending);
ATEX Class I, Zone 2, Ex nC IIC (Pending)
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), level 2
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-12 (Oscillatory wave immunity), level 3
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
MTBF: 160,000 hrs
Database: MIL-HDBK-217F, GB 25˚C
*Please check Moxa’s website for the most up-to-date certification status.
Warranty
5 years (see www.moxa.com/warranty for details)
Alarm Features
Pre/Post alarm video recording (9 MB memory)UÊ
Video motion detection with sensitivity tuningUÊ
Video loss alarmUÊ
Daily repeat timing scheduleUÊ
JPEG snapshots for pre/trigger/post alarm imagesUÊ
Automatic transfer of stored images via email or FTP with event-UÊ
triggered actions
HTTP Event Servers for setting customized alarm actionsUÊ
PAN/TILT/ZOOM
PTZ camera control through RS-232/422/485UÊ
PTZ control functions: PAN, TILT, ZOOM, FOCUS, moving speed, UÊ
preset position (max. 25 positions)
10 custom commands for customized PTZ controlUÊ
Supported devices and protocols: Pelco D, Pelco P, Dynacolor UÊ
DynaDome, Custom Camera
PTZ driver upload supportedUÊ
Supports transparent PTZ control for controlling the PTZ camera with UÊ
legacy PTZ control panel or keyboard connected with a PC or VPort
decoder
Security
User level password protectionUÊ
IP address filtering UÊ
System Requirements
Pentium 4, 2.4 GHz or aboveUÊ
512 MB memory or aboveUÊ
Windows XP/2000 with SP2 or aboveUÊ
Internet Explorer 6.x or aboveUÊ
DirectX 9.0c or aboveUÊ
Software Bundled Free
Moxa SoftDVR™ Lite: 1- to 4-channel IP surveillance software for viewing
and recording
VPort SDK PLUS: Includes CGI commands and ActiveX Control for
customized application or system integration for third-party developer
(Please go to Moxa’s website to download the latest SDK version.)
Specifications
NTSC PAL
Size Max. FPS Size Max. FPS
QVGA
320 x 240 30 320 x 288 25
CIF
352 x 240 30 352 x 288 25
VGA
640 x 480 30
640 x 576
25
4CIF
704 x 480 30 704 x 576 25
Full D1
720 x 480 30 720 x 576 25
Comentarios a estos manuales