Moxa Technologies W406 Manual de usuario descargar pdf (Pagina 5)

Solar Energy

Solar Community

Solar energy communities rely primarily on solar power for their energy needs, and

consequently it is important that such communities set up stable and reliable remote

monitoring systems.

W406 and UC-7112 Embedded Computers

The W406 and UC-7112 EDGE wireless and communication embedded computers

can be used as front-end communication computers that connect to the PV inverter, AI

and counter input module, and solar power meter. They can also be used for remote

monitoring, data acquisition, data logging, and protocol conversion.

OnCell G3150-HSDPA Cellular IP Gateway

The OnCell G3150-HSDPA cellular IP gateway makes use of high speed wireless

UMTS/HSDPA technologies and provides secure TCP/IP connections to remote solar

power meters over cellular networks.

ioLogik E1240 Remote Ethernet I/O

The ioLogik E1240 Ethernet I/O device with Active OPC Server proactively updates

event messages to the control center with real-time stamps over the network, for

effective integration with a real-time SCADA/HMI system.

Clean Energy

Wind Power

Communication between wind turbine towers is a major issue since

wind farms typically span vast distances that can go on for miles. Wind

turbines are also prone to electrical interference so highly reliable

anti-interference capabilities are also required to prevent unstable

transmissions and data loss. Given these circumstances, it is essential

for wind farms to employ rugged networking devices with long distance

transmission capability for remote monitoring in harsh environments.

V481 Embedded Computer

The V481 monitors the status of the generator and the communication

with ﬁeld PLC devices and ﬁeld site equipment. Designed with a low

power consumption CPU, it does not need a fan for ventilation, and its

compact design makes it a convenient alternative to traditional PCs.

NPort

S8000 Combo Switch / Serial Device Server

The NPort

S8000, which supports Moxa’s own Turbo Ring redundancy

protocol, can be used to connect both Ethernet and serial devices (PLCs,

RTUs, etc.) to an Ethernet network.

Electric Supply Stability

Automatic Meter Reading

A great deal of time and effort is consumed when engineers must make regular

in-person visits to record every power meter in a network. An automated meter

reading system can be established by using Moxa products to connect power

meters to central management workstations.

W406, UC-8410, and IA261-I/IA262-I Embedded Computers

The main task performed by Moxa’s W406 RISC-based EDGE wireless embedded

computer and UC-8410 and IA261-I/IA262-I RISC-based embedded computers are

data acquisition. These embedded computers store power usage data, perform

front-end data acquisition and processing, and then transmit the data to centralized

servers.

OnCell G3150 Cellular IP Gateway

The OnCell G3150 cellular IP gateway makes use of high speed wireless GSM/GPRS/

EDGE technologies and provides secure TCP/IP connections to your remote power

meters over cellular networks.

Why Moxa?

This application requires front-end data acquisition and basic computing. It does •

not require the higher performance of x86-based systems. Moxa’s RISC-based

embedded computers offer a reliable and cost-effective solution for basic data

acquisition and computing.

The RISC-based computing environment shortens the programming learning curve •

and makes system management easier.

Electric Infrastructure Efﬁciency

Substation Automation

Solar power plants use solar tracking systems to maximize the amount of solar

energy that can be absorbed from the Sun’s rays. The plants require embedded

computers for the central controller to map and track the Sun. Solar power

can also be used to operate trafﬁc signals, roadside displays, and peripheral

transportation devices.

DA-681 Embedded Computer

The DA-681 series x86-based embedded computer acts as a protocol gateway

that handles multiple devices running different protocols for front-end computing

and protocol conversion.

PT-7728 Rackmount Managed Ethernet Switch

The PT-7728 Gigabit modular Ethernet switch forms a network ring for

redundancy, ensuring superior reliability for complex, high voltage substation

environments through IEC 61850-3 and IEEE 1613 compliance.

IMC-101 and IMC-101G Media Converter

Field sites that are spread out over a wide area can beneﬁt from ﬁber. The IMC

series provides a cost-effective solution for extending transmission distance for

remote management applications.

Why Moxa?

Moxa’s products are being used in several power automation applications.•

In front-end communication applications for power substations, the front-end •

processor requires a variety of communication interfaces to act as a protocol

gateway. Moxa’s x86-based embedded computers feature multiple connection

options for greater networking versatility. Effective and readily available protocol

conversion facilitates data communication between legacy devices using

different protocols.

Moxa’s x86-based embedded computers are extremely stable and reliable and •

can be used as high performing backbone hosts for power substations.

Single mode converters support a communication distance up to 40 km and •

multimode converters support up to 5 km.

Moxa’s PowerTrans series of IEC 61650-3 Ethernet switches is tailored for •

substation automation. Take advantage of superior EMI/RFI shielding, a -40

to +85°C operating range, and redundant media and power for challenging

substation environments. Maximum ﬂexibility is achieved by a modular

rackmount design with high optical ﬁber and Gigabit port density.

Ethernet media converters support 10/100BaseTX to 100BaseFX or •

10/100/1000BaseTX to 1000BaseSX/LX/LHX/ZX.

The global demand for electricity has been increasing considerably in recent

years. It is expected that within the next 20 years, global demand will be

two times higher than what it is now. To solve this crucial issue and balance

the dilemma between economic growth and environmental protection, three

approaches based on currently available communication technology can be

used to reform the electrical power transmission infrastructure.

Clean Energy: • Integrate renewable energy such as wind power and solar

power to reduce carbon emissions from burning coal.

Electric Infrastructure Efﬁciency: • Digitize power grids to reduce network

energy consumption and enhance the energy efﬁciency of power generation,

transmission, distribution, and consumption.

Electric Supply Stability: • Use real-time energy monitoring management to

dispatch users’ energy consumption status and fully balance the distribution

of energy to stabilize the power supply and save energy.

These approaches provide ideal solutions that take energy, environmental

protection, and economic growth into consideration to establish a real-time,

stable, digitized, and intelligent Smart Grid.

EDS-408A Managed Ethernet Switch

Designed for long distance wind farm networks, Moxa’s slim rugged Ethernet

switches offer three ﬁber ports that can be used to interconnect individual

wind turbines and link to the tower control box. In addition, the fanless

switches emphasize an extended temperature rating, EMI immunity, and

redundant features to ensure stable operation on a wind farm.

VPort 351 Industrial Video Encoder

The VPort 351 video encoder is installed in wind turbines to allow engineers to

remotely monitor the status of wind turbine operations from the control center.

Why Moxa?

Wind power generation systems are always installed in harsh environments •

with dust and wind. Under these circumstances, using a PC with a fan as

the host platform will result in fan problems and system crashes. Moxa’s

compact and fanless embedded computers can be easily installed to replace

the PC-based system.

The recovery time of a Moxa Turbo Ring system is less than 20 ms.•

Moxa’s EDS-408A industrial Ethernet switch supports 3 100FX ports, 2 ﬁber •

ports for redundant ring, and 1 ﬁber port for uplink to the wind turbine.

The ﬁber model offers reliable communication over long distances and saves •

installation as well as cabling costs.

Wind turbine applications require serial-to-Ethernet solutions that can •

operate reliably for years without interruption.

The video encoder’s built-in ﬁber port saves the cost of a media converter.•

Solar Tracking System and Solar Transportation System

Solar power plants and other sophisticated solar power solutions use solar

tracking systems to maximize the amount of solar energy that can be absorbed

from the Sun’s rays. The plants require embedded computers to serve as the

Power Automation

Trend Towards Smart

Grids Foreseen in

Power Automation

Clean Energy—Wind Power

EDS-408A

8-port industrial managed

Ethernet switch with 3 ﬁber ports

3 ﬁber optic ports (single/multi mode, SC/ST connectors) •

Turbo Ring, RSTP/STP (IEEE 802.1w/D) for Ethernet redundancy•

-40 to 75°C operating temperature•

IKS-6726

22+2G-port industrial rackmount

modular Ethernet switch

High port density, rugged industrial-grade design •

Redundant power: universal 24/48 VDC or 110/220 VDC/VAC power supplies •

-40 to 75°C operating temperate•

V481

x86-based communication

embedded computer

8 software-selectable RS-232/422/485 serial ports •

Serial port speed from 50 bps to 921.6 Kbps, supporting non-standard baudrates •

10/100 and 10/100/1000 Mbps LANs for network redundancy•

NPort® S8000

Combo Switch / Serial Device

Server

4-port RS-232/422/485 serial device server with 2 KV (DC) isolation protection•

5-port managed Ethernet switch with Turbo Ring® (recovery time < 20 ms) or RSTP/STP (IEEE 802.1w/D) •

supported

Surge protection for serial, power, and Ethernet•

VPort 351

Full motion, 1-channel MJPEG/

MPEG4 industrial video encoder

Industrial design with -40 to 75°C operating temperature and ﬁber optic Ethernet port •

Video stream up to 30 frames/sec at full D1 (720 x 480) resolution •

Pre/post-alarm video recording function for advanced surveillance•

Clean Energy—Solar Power

EDS-608

8-port industrial compact

modular Ethernet switch

Compact modular design for tight space and ﬂexible solution•

Turbo Ring, RSTP/STP (IEEE 802.1w/D) for Ethernet redundancy•

-40 to 75°C operating temperature•

OnCell G3150-HSDPA

GSM/GPRS/EDGE IP Gateway

UMTS/HSDPA and GSM/GPRS/EDGE compliant•

Easy connection with versatile operation modes: Reverse Real COM•

Redundant DC power input•

ioLogik E1240

Daisy-chain Remote Ethernet I/O

with 8 AIs

Built-in 2-port Ethernet switch•

Easy integration with SCADA using Active OPC Server•

Painless migration with user deﬁnable Modbus address•

CN2600 Series

8/16-port RS-232/422/485

terminal servers with LAN

redundancy

Redundant COM function available when both LANs are active•

Dual-LAN cards with two independent MAC address and IP addresses•

Dual AC power inputs•

W406

RISC-based GSM/GPRS/EDGE

wireless embedded computer

GSM 850/900/1800/1900 MHz supported, GPRS/EDGE Class 12 supported•

Two software selectable RS-232/422/485 serial ports•

4 DIs, 4 DOs•

Electric Infrastructure Efﬁciency

PT-7728

IEC 61850-3 24+4G-port

rackmount Gigabit modular

managed Ethernet switch

Fully compliant with IEC 61850-3 and IEEE 1613•

Various media modules: RJ45, ﬁber, SFP, and M12 ports•

Isolated redundant power inputs with universal 24/48 VDC or 110/220 VDC/VAC inputs•

DA-681

x86-based rackmount embedded

computer

Dual power for network redundancy (DP/DPP models only)•

6 10/100 Mbps Ethernet ports for network redundancy•

Meets IEC 61850-3 certiﬁcation (DPP model only) •

IMC-101 Series

Industrial 10/100BaseT(X) to

100BaseFX media converters

10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X•

Link Fault Pass-Through (LFP)•

Power failure, port break alarm by relay output•

IMC-101G

Industrial Gigabit Ethernet to

ﬁber media converter

10/100/1000BaseT(X) and 1000BaseSX/LX/LHX/ZX supported•

Link Fault Pass-Through (LFP)•

Power failure, port break alarm by relay output•

Electric Supply Stability

OnCell G3150

GSM/GPRS/EDGE IP Gateway

2 digital inputs and 1 relay output for remote alarm•

Connect both Ethernet and serial devices to cellular networks•

Centralized private IP management software•

UC-8410

RISC-based communication

embedded computer

Customized ﬂexible expansion for greater versatility•

8 RS-232/422/485 serial ports; 4+4 DI/DO channels•

16 MB NOR Flash onboard to store OS, 32 MB NAND Flash onboard for data storage•

IA261-I/IA262-I

RISC-based automation

embedded computer

Patented “H-Type” heat dissipation•

4 RS-232/422/485 serial ports, 8+8 DI/DO channels, up to 30 VDC•

Dual LAN ports for network redundancy with VGA interface for ﬁeld site monitoring•

central controller for mapping and tracking the Sun. In addition, solar power can

also be used to operate trafﬁc signals, roadside displays, and various peripheral

transportation devices.

V468 Embedded Computer

The V468 embedded computer can serve as the central controller for mapping

and tracking the Sun in solar power plants, and sending data back and forth

between the tracker and control center.

EDS-608 Managed Ethernet Switch

The award-winning EDS-600 series allows users to specify the port density and

type (10/100/1000 copper and/or 100/1000 ﬁber ports) for ﬂexible conﬁguration.

CN2600 Terminal Server

The CN2600 terminal server is used for data collection and converts industrial

serial devices into Ethernet devices and then sends data to the control center.

Why Moxa?

Solar applications require low power solutions. Moxa’s RISC-based embedded •

computers are energy efﬁcient and their compact form factor makes them cost-

effective and easy to install.

Embedded computers for data acquisition and front-end computing, and Rcore •

embedded software platform for faster and easier programming.

GSM/GPRS/EDGE IP gateways to extend communication—anytime, anywhere. •

Device servers for accurate data transmission supported by Moxa’s Turbo Ring •

system with recovery time under 20 ms.

IEC 61850-3 & IEEE 1613 compliance

The IEC 61850-3 and IEEE 1613 standards deﬁne the highest standard of EMI

immunity and error free communication requirements for network equipment

used in substations. Moxa’s substation Ethernet switches and embedded com-

puters comply with the IEC 61850-3 and IEEE 1613 standards, guaranteeing

that the computers are protected against various environmental factors.

Wind Power Solar Energy

Automatic Meter Reading

Product Overview

Substation Automation

power.indd 2 2009/5/12 4:50:16 PM

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

Moxa Technologies W406 Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores Moxa Technologies W406