Moxa Technologies EDS-728 Guía de instalación descargar pdf (Pagina 5)

DIN-Rail Mounting

The DIN-Rail attachment plates are permanently fixed to the back panel of the

EDS-728/828. Do not attempt to remove the attachment plates, since doing so

could damage the product

To Install:

Lock the brace by pressing the clips and then insert the top of the DIN-Rail

into the notches at the bottom of the top array of heat radiating ribs. Press the

EDS until the brace snaps into place.

To Release:

Use a flat-blade screw driver as a lever to force the braces downwards, and

then pull the EDS-728/828 out away from the DIN-Rail.

Wall Mounting (optional)

For some applications, you will find it convenient to mount the EDS-728/828

on the wall, as illustrated below.

STEP 1: Remove the aluminum DIN-Rail attachment plate from the

EDS-728/828’s rear panel, and then attach the wall mounting plates, as shown

in the diagram.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Sin comentarios

Moxa Technologies EDS-728 Guía de instalación Pagina 5