Moxa Technologies Managed Ethernet Switch/Extender Manual de usuario Pagina 98

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 109
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 97
Moxa Managed Ethernet Switch/Extender Featured Functions
3-85
Syslog Server 1/2/3
Setting Description Factory Default
IP Address Enter the IP address of Syslog server 1/2/3, used by your
network.
None
Port Destination
(1 to 65535)
Enter the UDP port of Syslog server 1/2/3. 514
NOTE
The following events will be recorded into the Moxa switch’s Event Log table, and will then be
sent to the
specified Syslog Server:
Cold start
Warm start
Configuration change activated
Power 1/2 transition (Off (On), Power 1/2 transition (On (Off))
Authentication fail
Topology changed
Master setting is mismatched
Port traffic overload
dot1x Auth Fail
Port link off/on
Using HTTPS/SSL
To secure your HTTP access, the Moxa switch supports HTTPS/SSL to encrypt all HTTP traffic. Perform the
following steps to access the Moxa switch’s web browser interface via HTTPS/SSL.
1. Open Internet Explorer and type https://{Moxa switch’s IP address} in the address field. Press Enter
to establish the connection.
2. Warning messages will pop up to warn the user that the security certificate was issued by a company they
have not chosen to trust.
Vista de pagina 97
1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 108 109

Comentarios a estos manuales

Sin comentarios