Moxa Technologies EDS-600 Series Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 145
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
3
3
Chapter 3 Featured Functions
In this chapter, we explain how to access the EDS-600’s configuration options, perform
monitoring, and use administration functions. There are three ways to access these functions:
RS-232 console, Telnet console, and web browser. The serial console connection method, which
requires using a short serial cable to connect the EDS-600 to a PC’s COM port, can be used if you
do not know the EDS-600’s IP address. The Telnet console and web browser connection methods
can be used to access the EDS-600 over an Ethernet LAN, or over the Internet.
The web console is the most user-friendly way to configure the EDS-600. In this chapter, we use
the web console interface to introduce the functions. There are only a few differences between the
web console, serial console, and Telnet console.
The following topics are covered in this chapter:
Configuring Basic Settings
Using Port Trunking
¾ The Port Trunking Concept
Configuring SNMP
SNMP Read/Write Settings
Using Communication Redundancy
¾ Gigabit Ethernet Redundant Ring Capability (< 50 ms)The Turbo Ring Concept
¾ Configuring “Turbo Ring” and “Turbo Ring V2”
¾ The Turbo Chain Concept
¾ The STP/RSTP Concept
Using Traffic Prioritization
Using Virtual LAN
Using Multicast Filtering
Using Bandwidth Management
Using Port Access Control
Using Auto Warning
Using Line-Swap-Fast-Recovery
Using Set Device IP
Using Diagnosis
Using Monitor
Using the MAC Address Table
Using Event Log
Using Syslog
Using HTTPS/SSL
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 144 145

Comentarios a estos manuales

Sin comentarios