Moxa Technologies NE-4100 Manual de usuario descargar pdf (Pagina 6)

10-6

www.moxa.com

[email protected]

Embedded Device Servers >

Embedded Device Servers

Go Ethernet with Thumb-sized Serial-to-Ethernet Solutions

MiiNePort E2 Series

The MiiNe was created to provide

manufacturers with a competitive

embedded serial-to-Ethernet solution. The MiiNePort E2, which uses

the MiiNe for its SoC, is one of the world’s tiniest embedded device

servers, and has the lowest power consumption of similar products.

The MiiNe’s features include:

• Cost-effective serial-to-Ethernet conversions

• ARM core

• Advanced UART technology

• Internal 2 MB Flash and 4 MB SDRAM memory

10/100 Mbps embedded serial device servers

Moxa’s MiiNePort E2 series embedded device servers are designed for

manufacturers who wanting add sophisticated network connectivity

to their serial devices with minimal integration effort. The MiiNePort

E2 is empowered by the MiiNe, Moxa’s second generation SoC, which

supports 10/100 Mbps Ethernet, delivers a serial baudrate of up to

921.6 Kbps, offers a versatile selection of ready-to-use operation

modes, and requires a minimal amount of power. With Moxa’s

innovative NetEZ technology, the MiiNePort E2 can convert any device

with a standard serial interface to an Ethernet-enabled device. In

addition, the MiiNePort E2 is the smallest embedded device server

without an RJ45 connector, making it easy to fit into virtually any

existing serial device.

MOXA MiiNe (196 pins CPU)

Ethernet Signals

GPIO

Timer

MAC Ethernet

SDRAM (4 MB)

FLASH (2 MB)

POWER System

Watchdog Timer

PHYUART

SPI

8-pin Connector

Overview

The MiiNe—Moxa’s 2nd Generation SoC

› Smallest embedded device server available—only 29 x 17 x 12.6

› EZPower for 3.3 to 5 VDC system power input supported

› Extremely low power consumption—only 140 mA @ 3.3 VDC or

92 mA @ 5 VDC

› Uses the MiiNe- Moxa’s second generation SoC

› Simple integration with NetEZ technology

› Operation versatility with Real COM/TCP/UDP/RFC2217/MCSC

Speciﬁcations

Form Factor

Type: Drop-in module

Dimensions: 29 x 17 x 12.6 mm (1.14 x 0.67 x 0.50 in)

Weight: 5 g

System Information

CPU: 32-bit ARM Core

RAM: 4 MB built in

Flash: 2 MB built in

Ethernet Interface

Number of Ports: 1

Speed: 10/100 Mbps, auto MDI/MDIX

Connector: 6-pin pin header

Magnetic Isolation Protection: 1.5 KV built-in

Serial Interface

Number of Ports: 1

Transmission Format: Standard TTL

Serial Communication Parameters

Data Bits: 5, 6, 7, 8

Stop Bits: 1, 1.5, 2

Parity: None, Even, Odd, Space, Mark

Flow Control: RTS/CTS, DTR/DSR, XON/XOFF

Baudrate: (non-standard baudrates supported)

MiiNePort E2: 50 bps to 230.4 Kbps

MiiNePort E2-H: 50 bps to 921.6 Kbps

Serial Signals

TTL: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RST (reset circuit), GND

Digital I/O Pins

GPIO: 4 programmable I/O pins

Software

Network Protocols: ICMP, ARP, IP, TCP, UDP, DHCP, HTTP, SNMP

V1, SMTP, TFTP, Auto IP, Telnet, BOOTP

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comentarios a estos manuales

Sin comentarios

Moxa Technologies NE-4100 Manual de usuario Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Moxa Technologies NE-4100