
UC-7112-LX Plus/UC-7112/UC-7110 Hardware Introduction
Ready
LED located on the RJ45 connector: 10M/Link x 2, 100M/Link x 2
TxD x 2, RxD x 2
Aluminum (1 mm)
77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in)
DIN-Rail, wall
-10 to 60°C (14 to 140°F)
-40 to 75°C (-40 to 167°F)
-20 to 80°C (-4 to 176°F)
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity:
5 to 95% (non-condensing)
-Vibration: 1 g @ IEC-68-2-6, sine wave (resonance search), 5-500 Hz, 1 Oct/min, 1 cycle,
13 min 17 sec
per axis (UC
-7110 only)
12 to 48 VDC
4.5 W
Standards and Certifications
UC-7110/7112: UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1
EN 55022 Class A, EN 61000-3-2 Class A, EN 61000-3-3, EN 55024, FCC Part 15 Subpart B Class A
RoHS, CRoHS, WEEE
Alert Tools: Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger:
Built-in WDT (watchdog timer)
MTBF (mean time between failures):
-7110: 149,414 hrs
-7112: 148,980 hrs
5 years
Note: The Hardware Specifications
apply to the embedded computer unit itself, but not to accessories. In
particular, the wide temperature specification does not apply to accessories such as the power adaptor and
cables.
Comentarios a estos manuales