Moxa Technologies CP-132U Series Manual de usuario descargar pdf (Pagina 64)

PCI Express Board User’s Manual Software Installation

3-49

Execute the following commands from the Linux prompt:

#mount /dev/cdrom /mnt/cdrom

#cd /

#mkdir moxa

#cd moxa

#cp /mnt/cdrom/<driver directory>/driv_linux_smart_vx.x_build_yymmddhh.tgz.

#tar –xzvf driv_linux_smart_vx.x_build_yymmddhh.tgz.

2. #cd mxser

#make clean; make install

3. #cd /moxa/mxser/driver

#./msmkod

4. #modprobe mxupcie

5. For CP-132EL, CP-132EL-I, CP-114EL, CP-114EL-I, use the Moxa Port Configuration Tool

to set Interface and Termination Resistor for the MUE series. The MUE series includes

CP-102E, CP-102EL, CP-132EL, CP-132EL-I, CP-114EL and CP-114EL-I.

Usage: muestty <operation> device

Device: The MUE series device node

Operation: -h Help

-g Get interface and terminator type

-i intf Set interface type with options below

-t value Set termination resistor with options below

intf RS232 RS-232 mode

RS422 RS-422 mode

RS4852W RS-485 2-wire mode

RS4854W RS-485 4-wire mode

value NONTERM Non termination resistor

120TERM 120ohm termination resistor

For example:

To set the MUE interface

# muestty –i RS422 /dev/ttyMUE2

To set the MUE termination resistor

# muestty –t 120TERM /dev/ttyMUE2

6. Use the Moxa diagnostics utility to verify the driver status:

#cd /moxa/mxser/utility/diag

#./msdiag

7. Use the Moxa terminal utility to test the tty ports:

#cd /moxa/mxser/utility/term

#./msterm

SCO

Moxa provides drivers that allow you to use the following serial board products under SCO Unix.

• PCI Express Boards: CP-118EL,CP-168EL, CP-104EL.

• Universal PCI Boards: CP-118U, CP-168U, CP-104UL, CP-104JU, CP-102U, CP-102UL

• PCI Boards: C168H/PCI, C104H/PCI, C104HS/PCI

• ISA Boards: C168H, C168HS, C168P, C104H, C104HS, C104P, CI-104J, CI-104JS

Follow the steps given in this section to install the SCO driver. Note that the SCO driver provided

by Moxa only supports RS-232. Consequently, the SCO driver will only work with CP-118U ports

that are configured for RS-232. Moxa provides drivers for the following versions of SCO:

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 98 99

Comentarios a estos manuales

Sin comentarios

Moxa Technologies CP-132U Series Manual de usuario Pagina 64

Comentarios a estos manuales

Relacionado con productos y manuales para Convertidores Serie / Repetidores / Aisladores Moxa Technologies CP-132U Series