Moxa Technologies CP-132U Series Manual de usuario descargar pdf (Pagina 65)

PCI Express Board User’s Manual Software Installation

3-50

• SCO OpenServer

• SCO UnixWare 7

• SCO UnixWare 2.1

The following steps are for installing the driver under SCO OpenServer. The installation

procedures for SCO UnixWare 7 and SCO UnixWare 2.1 are similar.

1. Copy the driver file .tar to your host.

2. #tar xvf <driver tar file>

/tmp/moxa/mxintall

/tmp/moxa/sco.tar

3. # cd/tmp/mxinstall

# ./mxinstall

4. The window shown below will open next. Press any key to continue.

======================================================================

Moxa Smartio Family Device Driver Installation (Ver. 1.8)

======================================================================

For SCO UNIX System V/386 Release 3.2

Tar files, please wait.....O.K.

Press any key to continue

5. The Basic Configuration window will open next. You can install up to four Moxa Smartio

Multiport Serial Boards under SCO Unix/SCO Open Server.

Moxa Smartio Family Installation Utility (Ver 1.8)

Smartio Family Basic Configuration

Board No. Board Type I/O Address Interrupt Bus/Dev No.

1 None ------------ ------------ ------------

2 None ------------ ------------ ------------

3 None ------------ ------------ ------------

4 None ------------ ------------ ------------

PgDn: getty Setting

Enter: Confirm Input Value

Esc: Exit

Tab: Change Item

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 98 99

Sin comentarios

Moxa Technologies CP-132U Series Manual de usuario Pagina 65