Moxa Technologies Industio CP-114 Series CP-114 Series Manual de usuario descargar pdf (Pagina 20)

Universal PCI Board User’s Manual Hardware Installation

2-9

CP-132UL-I V2

Onboard termination resistors can be activated individually for each serial port using jumpers JP1

and JP2. JP1 corresponds to serial port 1. Short the jumper pins to activate the termination resistor;

leave the jumper pins open to bypass the termination resistor.

The onboard DIP switches, S1 and S2, are used to select RS-422 or RS-485 mode for each serial port.

On each bank, switch 1 corresponds to port 1 and switch 2 corresponds to port 2. S2 selects between

RS-422 and RS-485; S1 selects between 2-wire and 4-wire RS-485.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 135 136

Sin comentarios

Moxa Technologies Industio CP-114 Series CP-114 Series Manual de usuario Pagina 20