Moxa Technologies Industio CP-114 Series CP-114 Series Manual de usuario descargar pdf (Pagina 27)

Universal PCI Board User’s Manual Hardware Installation

2-16

Plugging the Board into an Expansion Slot

ATTENTION

Safety First!

To avoid damaging your system and board, make sure your PC’s power is turned off before

installing your Universal PCI Board.

Step 1:

Power off the PC.

Step 2:

Shut off the power to any peripheral devices and remove the PC’s cover.

Step 3:

Configure the UPCI board’s DIP switches and jumpers as necessary. This only applies to

certain models. For additional information, please refer to your model in this chapter.

Step 4:

Insert the board firmly into a free PCI or PCI-X slot on the PC.

Step 6:

Use a screw to secure the board in place.

Step 7:

Replace the PC’s cover.

Step 8:

Power on the PC. The BIOS will automatically set the IRQ and I/O address. Each MOXA

UPCI board uses one unique IRQ and I/O address, both of which are assigned

automatically by the PCI BIOS.

Step 9:

Install the software. For details, please refer to the appropriate chapter for your operating

system.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 135 136

Sin comentarios

Moxa Technologies Industio CP-114 Series CP-114 Series Manual de usuario Pagina 27