Moxa Technologies VPort 25 Manual de usuario Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 32
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
6-16
Remote Monitoring Solutions
www.moxa.com
6
Video Networking Solutions >
VPort 3310 Series
Rugged 1-channel MPEG4 industrial video server (encoder)
VPort 3310 Series
Introduction
The VPort 3310 is a 1-channel industrial video server (encoder)
that uses the standard MPEG4 algorithm, and features DIN-Rail
mounting capability, 24 VDC redundant power inputs, and IP30
protection to meet the requirements of inustrial environments. A
cutting edge MPEG4 algorithm gives the VPort 3310 an FPS of up
Industrial design with -40 to 75°C operating temperature
Compress analog video/audio signals in MPEG4 video stream
Multicast (IGMP) for transmission ef ciency
Video stream up to 30 frames/sec at CIF (352 x 240) resolution
Free VPort SDK and 4-channel video surveillance software
Specifi cations
NTSC PAL
Size Max. FPS Size Max. FPS
QCIF
176 x 120 30 176 x 144 25
CIF
352 x 240 30 352 x 288 25
VGA
640 x 480 10 640 x 576 8
4CIF
704 x 480 10 704 x 576 8
The certifi cation logos shown here apply to some or all of the products in this
section. For details, see “Regulatory Approvals” under “Specifi cations” below.
to 30 in CIF resolution (352 x 240), with maximum bandwidth of
1.6 Mbps, to provide high video performance and more efficient
network transmission. In addition, the VPort 3310 also supports audio
communication for a voice-over-IP solution, making the control of your
video surveillance system more real-time.
Video
Video Compression: MPEG4 (ISO/IEC 14496-2)
Video Inputs: 1, BNC connector (1.0 Vpp, 75 ohms)
Video Outputs: 1, loop-through BNC connector
NTSC/PAL: Auto-sensing or manual
Video Resolution and FPS (frames per second):
Video Viewing:
• Adjustable image size and quality
• B/W or color control
• Timestamp and text overlay
Audio
Audio Inputs: 1 Line-in or MIC-in with 3.5 mm phone jack
Network
Protocols: TCP, UDP, HTTP, SMTP, FTP, RTSP, RTP, RTCP, NTP,
DNS, DDNS, IGMPv3, SNMPv1/v2c/v3, DHCP, UPnP, PPPoE
Ethernet: 1 10/100BaseT(X) auto negotiating RJ45 port
Serial Port
COM Ports: 1, RS-232 (DB9 male connector) or RS-485 (terminal
block connector), max. speed of 115.2 Kbps
GPIO
Digital Inputs: 2, max. 8 mA
• High: +13 to +30V
• Low: -30 to +3V
Relay Outputs: 2, max. 24 VDC @ 1 A
LED Indicators
PWR1: Power 1
PWR2: Power 2
FAULT: Power failure
VIDEO: Video input
AUDIO: Audio input
SERIAL: COM port status
Power Requirements
Input Voltage: 2 24 VDC power inputs for redundancy
Power Consumption: Max. 7.5 W
Physical Characteristics
Housing: Metal, IP30 protection
Dimensions: 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in)
Weight: 790 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Alarms
Video Motion Detection: Includes sensitivity tuning
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging: Automatic transfer of stored images via
email or FTP with event-triggered actions
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comentarios a estos manuales

Sin comentarios