Moxa Technologies VPort 25 Manual de usuario Pagina 18

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 32
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 17
6-18
Remote Monitoring Solutions
www.moxa.com
6
Video Networking Solutions >
VPort 2141
Video
Video Compression: MJPEG
Video Inputs: 4, BNC connector (1.0 Vpp, 75 ohms)
NTSC/PAL: Auto-sensing or manual
Video Resolution and FPS (frames per second):
Video Viewing:
• Adjustable image size and quality
• B/W or color control
• Timestamp and text overlay
• 5 privacy masks for each camera
Network
Protocols: TCP, HTTP, SMTP, FTP, NTP, DNS, DHCP, PPPoE,
DDNS, UPnP
Ethernet: 1 10/100BaseT(X) auto negotiating RJ45 port
Serial Port
COM1 Port: RS-232 (DB9 male connector), max. speed of 115.2
Kbps
COM2 Port: RS-485 (terminal block connector), max. speed of
115.2 Kbps
GPIO
Digital Inputs: 4, max. 12 VDC @ 50 mA
Relay Outputs: 4, max. 24 VDC @ 1 A, 125 VAC @ 0.5 A
Compact, 4-channel MJPEG video server (encoder)
Compress analog video signals in MJPEG video streams
Video stream up to 30 frames/sec at CIF (352 x 240) resolution,
and 15 frames/sec at Quad view
PPPoE, DDNS, UPnP, and IP fi ltering supported
Free VPort SDK and 4-channel video surveillance software
VPort 2141
Introduction
The VPort 2141 video server comes equipped with a 4-channel video
input image digitizer, image compressor with MJPEG compression,
and web server accessible through a 10/100 Mbps Ethernet port. With
Specifi cations
NTSC PAL
Size Max. FPS Size Max. FPS
QCIF
176 x 120
30 176 x 144 25
CIF
352 x 240 30 352 x 288 25
4CIF
704 x 480 10 704 x 576 8
Quad
15 15
the VPort 2141, you can digitize analog video sources and distribute
digital images over an IP network to turn your CCTV system into a true
“Video-over-IP” network system.
LED Indicators
Network: ACTIVE, LINK, FDX (full duplex)
System: POWER, CONNECT, SERIAL
Power Requirements
Input Voltage: 12 VDC, 1.5 A
Power Consumption: Approx. 8 W
Alternative Power Input: Terminal block for 12 to 15 VDC/VAC, min.
1.5A
Power Output: Terminal block for 12 VDC, max. 500 mA
Physical Characteristics
Housing: Metal
Dimensions: 146.2 x 163.2 x 40 mm (5.76 x 6.43 x 1.57 in)
Weight: 820 g
Installation: DIN-Rail mounting (with optional kit), wall mounting
Alarms
Video Motion Detection: Includes sensitivity tuning
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging: Automatic transfer of stored images via
email or FTP with event-triggered actions
PAN/TILT/ZOOM
PTZ Camera Control: Via RS-232/485 port
Supported Device Protocol: Sony VISCA, Cannon VC-C1/VC-C3/
VC-C4, Samsung SmartDOME, Dynacolor DynaDOME, Pelco D
protocol, Liling PIH-7x00, Ernitec, Custom Camera
Detection: Automatic PTZ camera model detection
Security
Password: User level password protection
Filtering: By IP address
The certifi cation logos shown here apply to some or all of the products in this
section. For details, see “Regulatory Approvals” under “Specifi cations” below.
Vista de pagina 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Comentarios a estos manuales

Sin comentarios