Moxa Technologies VPORT P06-1MP-M12 Manual de usuario descargar pdf (Pagina 37)

IP Surveillance

18-37

[email protected]

www.moxa.com

IP Surveillance >

VPort D361 Series

1-channel H.264/MJPEG industrial video decoders

VPort D361 Series

The VPort D361 is a 1-channel video decoder for decoding H.264/

MJPEG video streams from VPort series video encoders and VPort

IP cameras back to analog video signals. The analog video signal can

be sent to legacy CCTV devices, such as monitors, multiplexers, and

matrix switches, which can be used as originally intended as part of

CCTV systems. In addition, bi-directional audio enables ready-to-use

voice-over-IP communication between the video encoder and decoder.

Monitoring your cameras that are part of a large CCTV system is easy

with the VPort D361, which can be set up to switch between different

video sources either manually or automatically within a given time

interval. Up to 64 video sources can be included in the list. In addition,

the 2 DIs located on the top panel of the VPort D361 can be used to

create 2 control buttons for up and down video source selection.

Speciﬁcations

Introduction

› Decode H.264 and MJPEG video streams to an analog video signal

automatically

› Manual selection or automatic scan with maximum of 64 video

sources

› 2-way (1 in, 1 out) audio supported

› Transparent PTZ control with legacy PTZ controller

› SNMP for network management

Video

Video Decoding: H.264 (MPEG4 part 10), MJPEG (auto-detecting)

Video Inputs: Accepts video streams from VPort series video encoders

(VPort 364, VPort 461) over TCP/IP networks

Video Outputs: 1, BNC connector (1.0 Vpp, 75 ohms), NTSC or PAL

Video Resolution: Max. of 540 TVL lines

Video Sources: Up to 64, selected manually by web server or digital

inputs, or selected automatically by scanning within a set time interval

Video Viewing:

• Max. 30/25 FPS (NTSC/PAL) can be decoded

• OSD (on-screen display) with video source, video source IP, date/

time, and customized information

Audio

Audio Inputs: 1 Line-in or Mic-in with 3.5 mm phone jack

Audio Outputs: 1 Line-out with 3.5 mm phone jack

Network

Protocols: TCP, UDP, HTTP, SMTP, Telnet, NTP, DNS, DHCP, UPnP,

RTP, RTSP, SNMPv1/v2c/v3

Ethernet: 1 10/100BaseT(X) auto negotiating RJ45 port

Serial Port

PTZ Ports: 1, RS-232/422/485 (terminal block connector),

max. 115.2 Kbps

Console Port: 1 RS-232 RJ45 port

GPIO

Digital Inputs: 2, max. 8 mA

High: +13 to +30 V; Low: -30 to +3 V

Relay Outputs: 2, max. 24 VDC @ 1 A

LED Indicators

STAT: Indicates if the system booted properly or not

PWR1: Power 1

PWR2: Power 2

FAULT: Can be conﬁgured to correspond to system alarm, power

failure, or disconnected network

Power Requirements

Input Voltage: 2 12/24 VDC or 24 VAC inputs for redundancy

Power Consumption: Max. 8 W

Physical Characteristics

Housing: Metal, IP30 protection

Dimensions: 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in)

Weight: 910 g

Installation: DIN-Rail mounting, wall mounting (with optional kit)

PAN/TILT/ZOOM

PTZ Camera Control: Transparent PTZ camera control with legacy

PTZ controller through the RS-232/422/485 PTZ port

Security

Password: User level password protection

Filtering: By IP address

Environmental Limits

Operating Temperature:

Standard Models: 0 to 60°C (32 to 140°F)

Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature: -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity: 5 to 95% (non-condensing)

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 45 46

Comentarios a estos manuales

Sin comentarios

Moxa Technologies VPORT P06-1MP-M12 Manual de usuario Pagina 37

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Moxa Technologies VPORT P06-1MP-M12