Moxa Technologies VPORT P06-1MP-M12 Manual de usuario Pagina 41

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 46
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 40
IP Surveillance
18-41
www.moxa.com
IP Surveillance >
MxNVR-IA8 Series
18
MxNVR-IA8 Series
8-channel industrial network video recorders for harsh environments
Supports H.264, MPEG4, and MJPEG video recording
Can record up to 8 VPort video stream channels
Supports video recording by schedule and event record
Built-in 2x2.5” SATA hard disk interface for storage hard disks*
-40 to 7C operating temperature (requires solid state disk)
Modbus/TCP supported for direct communication with SCADA
systems
Supports IEEE 802.1X for high network security
Robust, fanless, 19” rackmount design
*Hard disk not included in standard package
Introduction
Specifications
The MxNVR-IA8 is a revolutionary new 8-channel industrial network
video recorder designed for recording the VPort’s MJPEG, MPEG4,
and H.264 video streams in harsh environments. With rugged
design features, such as no heater or fan, a -40 to 75°C operating
temperature, and protection against high EMI and surges, as well as
the ability to save bandwidth when transmitting video streams back
to the remote control center or machine room for video recording,
the MxNVR-IA8 is tailor-made for field site applications. Since videos
are only transmitted when remote live view and video playback are
required, you will see an improvement in network transmission
efficiency and a noticeable reduction in your bandwidth investments.
Recording
No. of Streams: 8 VPort video/audio streams
Stream Types: H.264, MPEG4, MJPEG
Video Input: via Ethernet
Video File Format: AVI
Record Modes: Manual, schedule, alarm
Pre-alarm Recording: Up to 30 sec.
Post-alarm Recording: Up to 60 sec.
Searching
Search Modes: Camera, date/time, event
Playback
Method: Remote access, FTP le download
Remote Access: Playback via web browser or client software
FTP File Downloads: Playback via popular media player (requires
FFDShow)
Storage
Disk Interface: 2 2.5” SATAII sockets
Note: Storage disks are not included. Users will need to purchase 2.5” hard disks
or SSDs (solid state disks) from a hard disk vendor.
Network
Protocols: TCP/IP, UDP, HTTP, SMTP, NTP, DNS, DHCP, UPnP, RTP,
RTSP, ICMP, IGMPv3, SNMPv1/v2c/v3, DDNS, FTP, Modbu/TCP,
802.1X
Ethernet: 1 auto-sensing 10/100/1000BaseT(X) RJ45 connector
Connections: 10
Data Ports (reserved for future use)
COM Ports: 2 RS-232/422/485 ports, with DB9 male connectors (for
external devices)
USB Ports: 1 USB 2.0 port
GPIO
Digital Inputs: 6, source type, 0 to 5 VDC at 15 Hz
Level 0: Close to GND
Level 1: Open
Digital Outputs: 2, source type, 0 to 5 VDC, max. 20 mA
Level 0: 0 to 0.55 V
Level 1: 4.2 to 5.0 V
LED Indicators
STAT: Indicates if system has booted up and is operating properly
PWR: Power
HDD: Indicates if the hard disk is or is not working
FAULT: Can be set up to correspond with system alarms—video loss
or network down
Video 1/2/3/4/5/6/7/8: The status of video channels 1 to 8
Power Requirements
Input Voltage: 1 24 VDC power input with 3-pin terminal block
connector
Power Consumption: Max. of 20 W (with 2 2.5” hard disks)
Physical Characteristics
Housing: Metal
Dimensions: 440 x 44 x 325 mm (17.32 x 1.73 x 12.8 in)
Installation: 19” rackmount
Security
Password: User level password protection
Filtering: By IP address
Authentication: 802.1X
Vista de pagina 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46

Comentarios a estos manuales

Sin comentarios